Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Brake Light on a Fiat 500e

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
This video is currently unavailable

Open the boot lid and unscrew the two screws that secure the light unit to the bodywork. At this point, you can detach the headlamp structure by hand.

Disconnect the connector and, after positioning yourself for better access (for example, resting the headlamp on a suitable bench), open the headlamp structure at its midpoint by unscrewing the four screws that held it together. Now you can see how easy it is to replace the bulb of your interest by simply unscrewing it and fitting the new one. Reassemble everything by reversing the steps.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Fiat 500e located?
Where is the fuse box of the Fiat 500e located?
Fiat 500 (2020-2026 / 500 E, 332) In this new guide, we will describe the steps you need to take in order to quickly locate the fuse box of your Fiat 500e. First of all, park the car …
How to Reset the Tyre Pressure Warning Light on the Fiat 500e
How to Reset the Tyre Pressure Warning Light on the Fiat 500e
Fiat 500 (2020-2026 / 500 E, 332) Following the instructions in this guide, you will see how to reset the tyre pressure monitoring system (TPMS) warning light on the Fiat 500e; before…
How to activate and deactivate the lane assistant of the Fiat 500e
How to activate and deactivate the lane assistant of the Fiat 500e
Fiat 500 (2020-2026 / 500 E, 332) In this short guide, we will see the instructions that will allow us to enable and disable the lane assistant or lane assist on the Fiat 500e, in sim…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos