Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the External Wing Mirror on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Side mirror

In this video tutorial, we will see how to dismantle and replace the external wing mirror on the Fiat Grande Punto, as well as on the Punto Evo. First, remove the small plastic cover located under the wing mirror by prying it off with something thin; then disconnect the electrical connector for the mirror adjustment, as shown in the video. At this point, unscrew the three fixing screws using a Torx key; all that remains is to completely remove the external wing mirror, applying the reverse procedure for reassembly!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Mirror Cap on the Fiat Grande Punto
Replacing the Mirror Cap on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, see how to replace the mirror cap and the entire external rear-view mirror on the Fiat Grande Punto, as well as on the Punto Evo. In t…
How to Replace the External Rear-View Mirror on a Fiat Punto Evo
How to Replace the External Rear-View Mirror on a Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, we will go through the steps to remove and replace the external rear-view mirror on a Fiat Punto Evo. First, open the front door of the vehicl…
How to Remove the External Mirror of a Fiat Grande Punto
How to Remove the External Mirror of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to remove the external mirror of a Fiat Grande Punto. Use a lever (plastic or rubber) to pry between the perimeter of the mirror h…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos