Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the rear window mechanism on the Fiat Grande Punto?

Model: Fiat Punto MK 3, 199, Grandepunto , Punto EVO - Years 2005-2018

In today's video tutorial we will see how to remove the rear window lift mechanism on the Fiat Grande Punto, but also on the Punto Evo. First of all we open the front door and start by removing the window handle; to do this we use a flat screwdriver to remove the metal stop that we find on the inside, as shown in the video. At this point we unscrew the screws of the door panel, in order to remove it; then we can disassemble our window mechanism, unscrewing the latter's nuts: we use a socket wrench. Now let's reassemble everything, following the video until the end!

Posted on 8 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rearview mirror on Fiat Grande Punto
How to remove the rearview mirror on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) How to remove the rearview mirror on Fiat Grande Punto? Let's see in this video how to proceed: with a spatula with plastic or rubber coating, we go …
How to change the thermostat on the Fiat Grande Punto 1.4
How to change the thermostat on the Fiat Grande Punto 1.4
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) Let's find out in this video the main instructions to remove and replace the coolant thermostat on the petrol Fiat Grande Punto 1.4. First we open th…
Disassembly of the rear bumper Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, 199, Grandepunto , Punto EVO) In this video we will see how to remove the rear bumper of the Fiat Grande Punto. First we will have to lift the car as we will have to remove the re…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos