Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

To replace the dipped beam bulb on the Fiat Punto, you need to follow some precautions; first, open the bonnet of the Fiat Punto. The space where you will be working is very limited, making it difficult to see properly, so use a mirror to get a better view of the inside, where the bulb you want to replace is located.

Start by removing the rubber cover, then you will find two clips that hold the bulb in place; once the clips are removed, pull out the faulty bulb and proceed to install the new one. Work in reverse to reassemble all parts. Once the new bulb is installed, start the vehicle to check if it works correctly.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulb of the Fiat Grande Punto
How to Replace the Dipped Beam Bulb of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will see how to remove and replace the dipped beam bulb of the front headlamp of the Fiat Grande Punto, as well as the…
Replace the Headlight Bulb on a Fiat Grande Punto
Replace the Headlight Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, follow the step-by-step instructions to remove and replace the dipped beam bulb of the front headlamp on a Fiat Grande Punto. First, o…
How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the dipped/main beam bulb on the Fiat Grande Punto, open the bonnet, go to the rear of the headlamp, remove the plastic cover using a smal…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos