Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Replace the headlight bulb on Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 199, Punto EVO, Grandepunto , MK 3 - Years 2005-2018
Part: Headlight bulb
Operation: Replace the headlight bulb on Fiat Grande Punto

In this video we will see the step by step instructions to be able to remove and replace the dipped beam headlight bulb on a Fiat Grande Punto. First of all we open the bonnet of our car and we go to remove the plastic protective cover of our headlight; then disconnect the electrical connector of the light bulb and unhook the metal clip that we find inside, as shown in the video. At this point we remove and replace the low beam bulb with the new one, of the right type (in this case of type H4); we just have to reassemble everything!


Posted on 8 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Punto 2005-2018 - Why have the front bulbs on the Fiat Punto stopped working? Read Answer
    • Punto 2005-2018 - Where are the position lights located in the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How to replace the parking light on the Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How to replace the headlight bulb on a Fiat Punto? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos