Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

In today's video tutorial, you will see how to remove and replace the dipped beam bulb of the front headlamp of the Fiat Grande Punto, as well as the Punto Evo. First, open the bonnet and start by removing the plastic cover protecting the bulb; then disconnect the electrical connector and unclip the metal spring to remove it and replace it with the new one of the correct type (in this case, a new H4 LED bulb is fitted); then reassemble everything, following the video tutorial to the end for the replacement of the position light!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Replace the Headlight Bulb on a Fiat Grande Punto
Replace the Headlight Bulb on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, follow the step-by-step instructions to remove and replace the dipped beam bulb of the front headlamp on a Fiat Grande Punto. First, o…
How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the dipped/main beam bulb on the Fiat Grande Punto, open the bonnet, go to the rear of the headlamp, remove the plastic cover using a smal…
How to Replace the Dipped Beam Bulbs in a Fiat Grande Punto?
How to Replace the Dipped Beam Bulbs in a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) As shown in this tutorial, replacing the dipped beam bulbs in a Fiat Grande Punto is an extremely simple and quick task. Before proceeding, ensure th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos