Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulbs in a Fiat Grande Punto?

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
Video tutorial

As shown in this tutorial, replacing the dipped beam bulbs in a Fiat Grande Punto is an extremely simple and quick task. Before proceeding, ensure that the key is not inserted to operate safely.

Start by opening the bonnet, then locate the rubber cap at the back of the headlamp, remove it, and disconnect the power connector. Next, unclip the metal clip, grasp the bulb, and pull it out of the housing.

At this point, insert the replacement bulb, avoiding direct contact with the glass, and follow the reverse procedure to reassemble everything.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Install H4 LED Bulbs on the Fiat Grande Punto
How to Install H4 LED Bulbs on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To install an H4 LED bulb (dipped and main beam) on a Fiat Grande Punto, start by removing the rubber cap at the back of the headlamp, disconnect the…
How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
How to Replace the Dipped/Main Beam Bulb on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the dipped/main beam bulb on the Fiat Grande Punto, open the bonnet, go to the rear of the headlamp, remove the plastic cover using a smal…
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Replacing the Rear Lights on Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video, you will learn how to remove and replace the rear lights on a Fiat Grande Punto and Punto Evo by following these simple steps. Firs…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos