Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Replacing the dead battery in a Fiat 500 is a very simple and quick operation. To carry out the replacement, you will need a 10mm spanner and a 13mm socket with an extension.

As shown in the attached tutorial, start by unscrewing the nuts from the two terminals using the 10mm spanner, disconnecting them starting with the negative. Now unscrew the lower 13mm bolt and also remove the plastic block.

At this point, you can remove the cover, lift, and extract the battery from its housing, insert the replacement battery, and tighten the bolt and nuts.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Press the designated unlock button to extract the physical emergency key from the electronic key of your Fiat 500 X. Using the extracted physical key…
How to Replace the Key Battery on a Fiat 500 Electric
How to Replace the Key Battery on a Fiat 500 Electric
Fiat 500 (2020-2026 / 500 E, 332) This article explains how to replace the battery in the key of a Fiat 500 Electric. The procedure requires only a small flathead screwdriver and take…
How to Replace the Key Battery on a Fiat 500
How to Replace the Key Battery on a Fiat 500
Fiat 500 (2007-2024 / 312) To correctly replace the small button battery located inside your Fiat 500 key, follow this guide. First, obtain a small flat-head screwdriver and a …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos