Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Windscreen Wiper Blade on the Fiat Tipo 356

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Windshield wipers

See other generations:
Video tutorial

In this video tutorial, learn how to remove and replace the rear wiper blade on the Fiat Tipo 356, 357, and 358 in simple and quick steps. First, obtain a new wiper blade of the same length; then lift the wiper arm and detach the blade from its arm, as shown in the video.

Next, replace it with the new one, inserting it into the arm's socket; secure it properly to finally test the new blade. You can use the same procedure to replace the front wipers as well!


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gearbox Oil on a Fiat Tipo 356
How to Replace the Gearbox Oil on a Fiat Tipo 356
Fiat Tipo (2016-2026 / 358, 356, 357) In this video, learn how to service the transmission by replacing the gearbox oil on a Fiat Tipo 356, following these simple steps. First, open the b…
How to Replace the Cabin Air Filter on Fiat Tipo 356
How to Replace the Cabin Air Filter on Fiat Tipo 356
Fiat Tipo (2016-2026 / 358, 356, 357) In today's tutorial video, you will learn how to replace the cabin air filter on a Fiat Tipo 356 1.6 MultiJet in simple and quick steps. First, locat…
Resetting the Maintenance Light on Fiat Tipo 356 1.4 Petrol
Resetting the Maintenance Light on Fiat Tipo 356 1.4 Petrol
Fiat Tipo (2016-2026 / 358, 356, 357) This guide explains how to reset the service light for routine maintenance oil change on a Fiat Tipo 356 with a 1.4 petrol engine; we will use a diag…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos