Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gearbox Oil on a Fiat Tipo 356

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Transmission fluid

In this video, learn how to service the transmission by replacing the gearbox oil on a Fiat Tipo 356, following these simple steps. First, open the bonnet of your car and start by removing the plastic engine cover to access the filler cap; then lift the vehicle and locate the drain plug on the gearbox: unscrew the bolt that obstructs access and remove the bolt, allowing the old gearbox oil to drain out. Finally, top up the oil by removing the filler cap!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Servicing the Fiat Tipo 356 1.6 MultiJet
Instructions for Servicing the Fiat Tipo 356 1.6 MultiJet
Fiat Tipo (2016-2026 / 356, 357, 358) Here are the instructions for performing the routine service, replacing the engine oil and oil filter, on the Fiat Tipo 356 with a 1.6 MultiJet engin…
How to change the gearbox oil in the Fiat Tipo?
How to change the gearbox oil in the Fiat Tipo?
Fiat Tipo (2016-2026 / 356, 357, 358) In this tutorial, you will see how to change the gearbox oil in the Fiat Tipo, a very simple and quick operation. First, lift the front of the vehicl…
Reset service light (engine oil) with Multiecuscan on Fiat Tipo 356
Reset service light (engine oil) with Multiecuscan on Fiat Tipo 356
Fiat Tipo (2016-2026 / 356, 357, 358) Let’s discover the steps to reset the service light for the routine maintenance oil change on a Fiat Tipo 356 using the Multiecuscan diagnostic tool.…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos