Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Windshield mounting on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2021
Part: Windshield
Operation: Windshield mounting on Fiat 500

In this video tutorial we will see how to mount the front windshield on a Fiat 500, following these important instructions. First of all it is necessary to have removed the old windshield and cleaned the side areas where the gasket is located. At this point, make sure that the windshield to be mounted is clean and apply the silicone seal on the sides of the entire windshield, evenly; then we apply pressure on the sides of the windshield and wait a couple of hours for the glue to dry. It is advisable to carry out the operation with the help of one or more people.


Posted on 20 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - What is the cost for replacing the windshield of the Fiat 500X? Read Answer
    • 500 2012-2023 - What is the price for the Fiat 500L windshield? Read Answer
    • 500 2007-2021 - How much does it cost to replace the windshield on a Fiat 500? Read Answer
    • 500 2007-2022 - How much does it cost to replace the Fiat 500 windshield? Read Answer
    • 500 2012-2023 - How much does the Fiat 500 L front windshield cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos