Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Internal Heater Radiator from a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Heater core

Start by removing the battery to allow access to the radiator. Once done, proceed to remove the clip that secures the hot air tap cable. Next, disconnect the two hoses connected to the valve by simply pressing on the metal clips and sliding them off. At this point, you can completely remove the tap cable. Then, focus on the radiator itself, which is secured by three screws. Proceed to unscrew and remove these screws. Once the screws are removed, you can extract the radiator from its housing, completing the disassembly successfully.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Radiator Fluid on a Fiat 600
Changing the Radiator Fluid on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this tutorial, you will learn how to change the radiator fluid on a Fiat 600: this includes performing the necessary bleeds and obtaining the new …
How to Top Up the Cooling Radiator on a Fiat 600
How to Top Up the Cooling Radiator on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Learn how to top up the fluid in the radiator reservoir on a Fiat 600. First, pull the plastic lever located at the bottom left of the dashboard, lif…
How to Replace the Radiator Hose Clamp on Fiat 600
How to Replace the Radiator Hose Clamp on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Learn how to replace the radiator hose clamp on a Fiat 600. Use a screwdriver to unscrew the metal clamp around the radiator hose at the bottom, allo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos