Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Radiator Fluid on a Fiat 600

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Antifreeze coolant

In this tutorial, you will learn how to change the radiator fluid on a Fiat 600: this includes performing the necessary bleeds and obtaining the new coolant compatible with your vehicle. First, unscrew the clamp on the radiator inlet hose located under the car: let all the old fluid drain out and then reattach the hose by tightening the clamp. Now, open the radiator bleed valve and the air valve: at this point, add the new radiator fluid and start the engine until it warms up, then reattach the drain hoses!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Cooling Radiator on a Fiat 600
How to Top Up the Cooling Radiator on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Learn how to top up the fluid in the radiator reservoir on a Fiat 600. First, pull the plastic lever located at the bottom left of the dashboard, lif…
How to Replace the Radiator Hose Clamp on Fiat 600
How to Replace the Radiator Hose Clamp on Fiat 600
Fiat Seicento (1998-2010 / MK 1) Learn how to replace the radiator hose clamp on a Fiat 600. Use a screwdriver to unscrew the metal clamp around the radiator hose at the bottom, allo…
How to Top Up the Windscreen Washer Fluid of a Fiat 600
How to Top Up the Windscreen Washer Fluid of a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you begin, open the front bonnet of your Fiat 600. Start by unscrewing and removing the cap located near the right front headlamp. Then, inser…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos