Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Wiper Arm

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
Video tutorial

Wipers are essential for drivers as they ensure excellent visibility in all weather conditions, but they must be fully intact and functional to do so. The first point to check on the arm is the spring; if it feels weak or worn, purchase a new one and replace it. Next, inspect the attachment point on the spindle that protrudes from the bonnet.

If the arm has some play, tightening the screw or nut that controls it may suffice.

The arm can be clipped onto the head of the spindle or secured with a screw or nut, which should be covered with a protective cap.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on a Fiat Punto
How to Replace the Front Wipers on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this short guide, you will see the steps to remove and replace the front wipers on a Fiat Punto Evo and Grande Punto. First, move to the front of …
How to Change the Wipers on a Fiat Grande Punto
How to Change the Wipers on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the wipers on a Fiat Grande Punto, lift the wiper arm off the windscreen until it is vertical. Rotate the blade to access the fixing point…
How to Replace the Rear Wiper Blade on the Fiat Grande Punto
How to Replace the Rear Wiper Blade on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the rear wiper blade on this vehicle yourself, follow the instructions below and refer to the tutorial video. First, lift the wiper arm un…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos