Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Driveshaft Oil Seal on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

In this video, we will see all the steps to remove and replace the front driveshaft oil seal on a Fiat Grande Punto. First, lift the vehicle and remove the left front wheel; then disconnect the wishbone from the braking system by unscrewing the fixing pin. At this point, proceed to remove the front driveshaft to access the oil seal, as shown in the video; remove the old seal and replace it with a new one, lubricating it well. Finally, insert the oil seal perfectly in place and reassemble everything, following the video to the end!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disassemble and Open the Gearbox on a Fiat Grande Punto 1.2 - 1.4
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's tutorial video, we will see how to disassemble and open the gearbox of the Fiat Grande Punto 1.2 or 1.4, as well as the Punto Evo and Brav…
Fuse Replacement on Fiat Grande Punto
Fuse Replacement on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Fuse replacement on the Fiat Grande Punto? Let's see where they are located. Open the door and enter the cabin, then open the glove compartment in th…
Disassembly of the front driveshaft (halfshaft) of the Fiat Grande Punto
Disassembly of the front driveshaft (halfshaft) of the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Below we will see the instructions that will allow us to disassemble and replace the front driveshaft or front axle of the Fiat Grande Punto. First, …

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos