Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front driveshaft (halfshaft) of the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Drivetrain

Below we will see the instructions that will allow us to disassemble and replace the front driveshaft or front axle of the Fiat Grande Punto. First, lift the vehicle and start unscrewing the gearbox oil drain bolt, letting it drain into a container; then disconnect the braking system from the axle, unscrewing the bolt as shown in the video. At this point, remove the front axle, inspecting or replacing it if damaged; then reassemble the driveshaft, following the reverse procedure!

Posted on 27 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Driveshaft Oil Seal on Fiat Grande Punto
Replacing the Front Driveshaft Oil Seal on Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, we will see all the steps to remove and replace the front driveshaft oil seal on a Fiat Grande Punto. First, lift the vehicle and remo…
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This brief guide outlines the main steps to remove and replace the clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First, open the bon…
Removing the Gearbox from the Fiat Grande Punto
Removing the Gearbox from the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide provides instructions for removing the dual logic gearbox from the Fiat Grande Punto, as well as the Punto Evo. First, lift the vehicle wi…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos