Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Clutch from the Fiat Grande Punto 1.2

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Clutch

This brief guide outlines the main steps to remove and replace the clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First, open the bonnet and start by removing the battery and battery tray; lift the vehicle and remove the driveshaft from the gearbox by taking off the wheel and unscrewing the bolts at the base of the driveshaft. At this point, remove the engine mount on the transmission side and proceed to dismantle the gearbox; take off the clutch discs to replace and then reassemble everything.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Clutch on a Fiat Grande Punto
Replacing the Clutch on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, discover the procedure that will show you the main steps on how to remove and replace the clutch discs on a Fiat Grande Punto. First, open the…
How to Remove the Clutch Pump on the Fiat Grande Punto
How to Remove the Clutch Pump on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's tutorial, you will see the main steps to remove and replace the clutch cylinder or pump on the Fiat Grande Punto. First, open the bonnet o…
Removing the Clutch on Fiat Grande Punto 1.2
Removing the Clutch on Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, follow the step-by-step instructions to remove and replace the clutch on a Fiat Grande Punto 1.2 Petrol. First, lift the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos