Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Does It Mean If the Clutch Pedal of the Fiat Punto Is Soft?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Clutch

If the clutch pedal is completely soft and offers no resistance, or touches the floor without returning, as shown in the video, the problem is almost certainly related to the hydraulic system of the clutch or a mechanical failure. Cars with hydraulic clutches generally use the same fluid as the brakes, or a small dedicated reservoir. So check it: if it is empty or very low, there is a leak in the system: look for fluid spots under the vehicle. It could be the master cylinder leaking fluid, or it may have worn seals; there could be fluid under the mat on the driver's side. In cars that have a cable instead of a hydraulic system, the cable may have come off or broken. Call a breakdown service: driving without a clutch is dangerous and can lock the gearbox.

Posted on 1 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Bleed the Clutch Pump in the Fiat Punto?
How to Bleed the Clutch Pump in the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) To bleed the clutch pump in the Fiat Punto, open the bonnet and unscrew the cap of the reservoir containing the clutch fluid. This will allow you to …
How to Remove the Clutch Pump on the Fiat Grande Punto
How to Remove the Clutch Pump on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's tutorial, you will see the main steps to remove and replace the clutch cylinder or pump on the Fiat Grande Punto. First, open the bonnet o…
What to do if you hear a squeak from the clutch pedal on a Fiat Punto
What to do if you hear a squeak from the clutch pedal on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) A squeak from the clutch pedal on a second-generation Fiat Punto is a common issue. The most frequent cause is the clutch hydraulic pump (slave cylin…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos