Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Pump on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Clutch

See other generations:
Video tutorial

To replace the clutch pump on a Fiat Punto, open the bonnet to access the components inside the engine bay. On the right side, you will find the battery, which needs to be removed from its housing by unscrewing the fixing screws and disconnecting the power cables.

After the battery and its base have been removed, locate the clutch pump next to the engine and above the gearbox: by disconnecting the power cables and unscrewing the fixing bolts, you can remove it and replace it with a new part.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Remove the Clutch Pump on the Fiat Grande Punto
How to Remove the Clutch Pump on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's tutorial, you will see the main steps to remove and replace the clutch cylinder or pump on the Fiat Grande Punto. First, open the bonnet o…
How to Replace the Fuel Pump on a Fiat Grande Punto?
How to Replace the Fuel Pump on a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the fuel pump on a Fiat Punto, lower the rear seat completely to access the components underneath. Here you will find the pump cover, whic…
How to replace the water pump on a Fiat Punto?
How to replace the water pump on a Fiat Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the water pump on a Fiat Punto, open the bonnet to access the components located inside the engine compartment: on the left side of the en…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - How much does it cost to replace the clutch on the Fiat Punto 1.2 8v? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos