Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Clutch Pump on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Pump

In today's tutorial, you will see the main steps to remove and replace the clutch cylinder or pump on the Fiat Grande Punto. First, open the bonnet of your car and locate the clutch pump, which is found on the front wall of the engine bay; then disconnect the hydraulic line from the bracket and remove the clutch pump, allowing the fluid to drain. At this point, replace it with the new one of the correct type; proceed to top up the fluid and reassemble everything, checking the operation of the pedal!

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Pump in the Fiat Grande Punto?
How to Replace the Brake Pump in the Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the brake pump in the Fiat Grande Punto, open the bonnet to access the engine bay. The pump is located immediately under the windscreen an…
Replacing the Clutch on a Fiat Grande Punto
Replacing the Clutch on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, discover the procedure that will show you the main steps on how to remove and replace the clutch discs on a Fiat Grande Punto. First, open the…
How to Remove the Gearbox and Clutch of the Fiat Grande Punto 1.2
How to Remove the Gearbox and Clutch of the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see the main steps to remove the gearbox and clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos