Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dualogic Gearbox from a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Transmission

See other generations:
Video tutorial

In this video, see how to remove the Selespeed actuator of the Dualogic gearbox from a Fiat Punto (also applicable to 500 or Panda): this component is the "arm" that physically changes gears, replacing the clutch pedal and manual gear lever; the Selespeed gearbox was developed by Magneti Marelli and has its origins in Formula 1. You need to remove the battery and the engine cover, which will allow you to access the component.

There are cables to disconnect at the front of the gearbox that connect to the gearbox casing, and the YouTuber will show you the bolts - there are at least five, plus another four, all 13 millimetres, at the bottom - that you need to remove.

Then proceed directly to the piece removed from its housing.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

Removing the Gear Knob of a Fiat Grande Punto
Removing the Gear Knob of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video tutorial, you will see how to remove and replace the gear knob of a Fiat Grande Punto, as well as the Punto Evo. First, get inside t…
Removing the Gearbox from a Fiat Punto
Removing the Gearbox from a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Learn how to remove the gearbox from a Fiat Punto by following the instructions below. First, lift the vehicle and start by disconnecting the electri…
How to Replace the Gearbox Cable on the Fiat Punto 1.2
How to Replace the Gearbox Cable on the Fiat Punto 1.2
Fiat Punto (1999-2011 / MK 2, 188) This guide shows you how to remove and replace the gearbox cable on the Fiat Punto 1.2, following the instructions below. First, raise the vehicle an…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos