Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Gearbox from a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Transmission

Learn how to remove the gearbox from a Fiat Punto by following the instructions below. First, lift the vehicle and start by disconnecting the electrical connector located on the gearbox; then disconnect the various pipes and the wishbone, as shown in the video. At this point, unscrew the bolts of the gearbox; then remove the engine mount to gently lower the gearbox, using a jack. Now, carry out any necessary inspection of the gearbox, following the video to the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Gear Knob of a Fiat Grande Punto
Removing the Gear Knob of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see how to remove and replace the gear knob of a Fiat Grande Punto, as well as the Punto Evo. First, get inside t…
Removing the Gearbox from the Fiat Grande Punto
Removing the Gearbox from the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide provides instructions for removing the dual logic gearbox from the Fiat Grande Punto, as well as the Punto Evo. First, lift the vehicle wi…
Removing the Gearbox Engine Mount on a Fiat Punto Evo 1.4 8V
Removing the Gearbox Engine Mount on a Fiat Punto Evo 1.4 8V
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, you will see how to remove the engine mount of the gearbox on a Fiat Punto Evo and Grande Punto, with a 1.4 8-valve petrol engine. Fir…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos