Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gearbox Cable on the Fiat Punto 1.2

Model: Fiat Punto MK 2, 188 - Years 1999-2011

This guide shows you how to remove and replace the gearbox cable on the Fiat Punto 1.2, following the instructions below. First, raise the vehicle and locate the cable on the gearbox; then loosen the adjustment nut and unscrew the bolt to remove the cable, disconnecting it from the gear lever side as shown in the video. At this point, remove and replace the cable with the new one, routing it through the adjustment and finally adjusting it, following the video tutorial to the end for reassembly!

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gear shift cable of the Fiat Punto Evo?
How do you replace the gear shift cable of the Fiat Punto Evo?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In order to replace the gear cable of the Fiat Punto Evo, you need to remove the gear knob and also the covering around the lever: this way you will …
Changing the Gearbox Oil in a Fiat Grande Punto
Changing the Gearbox Oil in a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Changing the transmission oil should be done at regular intervals to ensure the proper functioning of the gearbox. Here’s how to change it on a Fiat …
How to Replace the Gear Shift Bowden Cable on the Fiat Grande Punto
How to Replace the Gear Shift Bowden Cable on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this video, see how to replace the broken gear shift cable on a Grande Punto. The broken part is the Bowden cable, which contains a metal cable wi…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos