Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console of the Fiat Grande Punto Dashboard

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Center console tunnel

See other generations:
Video tutorial

In this video, we will see the main steps to remove the centre tunnel of the dashboard of the Fiat Grande Punto, as well as the Punto Evo. First, get into the vehicle and start by unscrewing and removing the gear knob, then detach the gaiter; next, unclip the plastic of the centre tunnel from the sides, unscrewing the screws underneath to remove the entire tunnel, as illustrated in the video.

At this point, proceed to refit the various plastics, securing them with the respective screws, applying the reverse procedure!


Updated on 7 May 2026 by ScegliAuto


Related tutorials

How to Remove the Air Control Panel on a Fiat Punto
How to Remove the Air Control Panel on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) How to remove the air control panel located on the centre console of a Fiat Punto? Follow this guide: remove the lower part of the centre tunnel, tak…
Replacing the Heater Fan Resistor on Fiat Grande Punto
Replacing the Heater Fan Resistor on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to remove the heater fan resistor on a Fiat Grande Punto? Let's see how to disassemble the fan resistor. Remove the plastic cover from under the…
Replacing the Window Switches on the Fiat Grande Punto - Punto Evo
Replacing the Window Switches on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Learn how to remove and replace the window switch or button of the Fiat Grande Punto, as well as the Punto Evo, by following these simple and quick s…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos