Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Headlight bulb

In this tutorial, you will learn how to replace the front headlamp bulb on a Fiat Panda. First, obtain the correct H4 replacement bulb, then switch off the vehicle and open the rear cover of the headlamp by moving the locking rod inwards. Next, disconnect the connector, unclip the metal clip of the bulb, and remove it from the housing. To fit the replacement, simply follow the reverse procedure, taking care not to touch the bulb with bare hands to avoid leaving residues that could cause overheating.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Fiat Panda 169
Replacing Front Headlight Bulb on Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Fiat Panda 169, as well as on other FCA group car models. First, open t…
Replacement of the Front Headlamp Bulb of a Fiat Panda
Replacement of the Front Headlamp Bulb of a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this guide, you will discover the instructions that will allow you to replace the front headlamp bulb of the Fiat Panda. First, open the engine co…
How to Change the Front Headlamp Bulb on Panda
How to Change the Front Headlamp Bulb on Panda
Fiat Panda (2003-2012 / 169, MK 2) Do you want to replace the bulbs inside the front headlamp of the Panda? Let's see how to disassemble all the pieces. Lift the bonnet and locate the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos