Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How are the longitudinal bars installed on the Fiat 500X?

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Roof Rack Bars
Operation: How are the longitudinal bars installed on the Fiat 500X?

In order to install the roof rack bars, it is necessary to insert the supports that fix the bars inside the relative guides that are located on the bars themselves. Once the supports have been inserted, it will be possible to go and position the bars in the upper part of the car: when the bars have been positioned, it will be possible to go and fix them by screwing the supports with the relative screws. Therefore, after installation, it will be necessary to check that the bars have been fixed correctly, that they are capable of carrying loads and that the doors can be closed.


Posted on 24 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos