Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to mount the longitudinal bars of the Fiat 500x

Fiat 500 - Video tutorial

Model: Fiat 500 500 X - Years 2014-2022
Part: Roof Rack Bars
Operation: How to mount the longitudinal bars of the Fiat 500x

In this video tutorial you can see how simple it is to assemble the longitudinal bars of the Fiat 500x (Green Valley QUICK bars), following a few simple steps that will help you manage your vehicle independently and correctly. First you have to buy the Green Valley QUICK model assembly bars; then position your vehicle in a flat and quiet area with the handbrake on. Take the bar and place it on the roof making it adhere well. Take the supplied key and tighten the screw to tighten the bar to the roof. Now you can put on the protective cap and that's it.


Posted on 24 October 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos