Do it yourself
Frequently asked questions about cars and motorcycles

What to Do If the Air Conditioning Knob on My Fiat Punto Is Stuck?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Checks and maintenance

See other generations:
Video tutorial

If the air conditioning knob on your Fiat Punto is stuck, you should know that it does not necessarily need to be replaced. If you are handy with DIY, you can use a 4mm Allen key (preferably screwdriver type) to remove the cover panel.

At this point, you can also detach the piece containing the knobs by disconnecting all the relevant connectors, levers, and clips. As you will see in the video, it is often just a cable that is stuck, preventing the knob from turning.

Simply reposition it (and ensure it does not get stuck again) and you are done.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Fiat Punto (1999-2011 / MK 2, 188) Before you can start, open the front passenger door of your Fiat Punto. Begin by unscrewing and removing the screws that secure the air conditioning …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If the air conditioning does not activate (the compressor does not start or the electromagnetic clutch of the pulley does not engage), the first thin…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will see the main instructions that will allow you to dismantle the air conditioning knobs and the bulbs of the controls …

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos