Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How do you replace the steering rods on the Fiat Punto?

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Steering rods
Operation: How do you replace the steering rods on the Fiat Punto?

To be able to replace the steering rods of the Fiat Punto you have to lift the car with a jack or a bridge, so that the wheel corresponding to the rods to be replaced is not in contact with the floor. Then it will be necessary to loosen the bolts that secure the wheel to its hub, removing it and accessing the components in its rear part. At this point it will be possible to unscrew the bolts that fix the tie rod to the wheel hub and to the final part of the axle shaft, so that a new one can be inserted. After installation you will be able to insert the removed parts again.


Posted on 6 May 2024 by ScegliAuto



Disassembly of the Fiat Punto steering wheel airbag
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Today we will see how to remove the steering wheel airbag on a Fiat Grande Punto and Punto Evo, following these simple and quick steps. First we get
Replacement of the steering column of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video tutorial we will see how to disassemble and replace the steering column of the Fiat Grande Punto, but also of the Punto Evo. First of a
How to remove the steering wheel on Fiat Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video we will see how to remove the steering wheel together with its airbag on a Fiat Punto Evo, following the instructions below. First o

    Frequently Asked Questions

    • Punto 2005-2018 - How much does the steering box cost of the Fiat Grande Punto? Read Answer
    • Punto 1999-2011 - How much is the steering box of the Fiat Punto 1300 multijet? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos