Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Column and Indicator Stalk on a Fiat Punto MK2

Model: Fiat Punto MK 2, 188 - Years 1999-2011

In this video, you will learn how to remove the steering column and indicator stalks on a Fiat Punto 188, second series. First, open the bonnet of your car and disconnect the battery terminals; then remove the plastic cover located under the steering wheel and use an Allen key to unscrew the airbag screws, as shown in the video. Once the airbag is removed, unscrew the central bolt of the steering wheel and take it off; now unscrew all the screws of the steering column, also removing the two indicator stalks!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the EPS Column from the Fiat Grande Punto
Removing the EPS Column from the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide provides step-by-step instructions for removing the EPS column from the Fiat Grande Punto, as well as the Punto Evo. First, open the front…
How to Repair the Electric Power Steering on a Fiat Punto
How to Repair the Electric Power Steering on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this brief guide, discover the main steps to repair or replace the electric power steering on a Fiat Punto by following these simple instructions.…
How to Remove the Indicator Stalk on Fiat Punto Evo
How to Remove the Indicator Stalk on Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The failure of the indicator stalk, particularly the flat cable inside, is a common fault on this car model, resulting in the airbag warning light il…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos