Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Tie Rod End on a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tie rods

See other generations:
Video tutorial

Watch this video for the removal of the steering tie rod end on a Fiat Punto. Position your car on a column lift, raising it to a comfortable working height.

Unscrew the wheel bolts with a socket wrench or air drill and remove the wheel. Then, begin unscrewing the bolts of the tie rod end with a socket wrench.

Unscrew the bolts located under the tie rod end and the stabiliser bar, pulling the tie rod end away from the vehicle body. Install the new steering tie rod end, then screw it in with all the associated bolts.

Finally, reattach the wheel with the bolts.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Remove the Track Rod End on Fiat Punto
How to Remove the Track Rod End on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Is the track rod end damaged? Here's how to remove it on a Fiat Punto. Lift the car on a column lift, securing it at a comfortable height to work. Un…
Replacing the Interior Light Fuse of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If the interior lights of the Fiat Punto stop working altogether, it may be due to a blown fuse caused by an overload. To replace it, remove the smal…
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Replacing the Timing Chain on a Fiat Grande Punto 1.3 MultiJet
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, you will see the main steps to remove and replace the timing chain on a Fiat Grande Punto 1.3 MultiJet. First, open the bonnet of your…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos