Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Interior Light Fuse of the Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Fuse box

See other generations:
This video is currently unavailable

If the interior lights of the Fiat Punto stop working altogether, it may be due to a blown fuse caused by an overload. To replace it, remove the small glove compartment located to the left of the steering column, under the light switches, to access the fuse plate.

To identify the fuse related to the interior lights, consult the diagram found in the user manual. In our case, the one to change is in position nine and is rated at 7.5 A. Remove the old one using long-nose pliers and insert the new one using the same tool.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the interior light bulb in the Fiat Grande Punto, use a tool like a screwdriver to lever the light fitting from its housing. Once detached,…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Punto. Begin by unclipping and lowering the light control panel located at the bottom left of…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If the Hill Holder and ESP warning lights illuminate on the dashboard of the Fiat Punto MK3, you can turn them off by watching this video: the soluti…

    Frequently Asked Questions

    • Punto 1999-2011 - Where is the fuse of the reversing light of the Fiat Punto located? Read answer
    • Punto 2005-2018 - Where is the fuel pump relay located in the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the air conditioning fuse on Fiat Grande Punto? Read answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto turn signal relay located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos