Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Track Rod End on Fiat Punto

Model: Fiat Punto MK 2, 188 - Years 1999-2011
Part: Control arm

Is the track rod end damaged? Here's how to remove it on a Fiat Punto. Lift the car on a column lift, securing it at a comfortable height to work. Undo the wheel nuts with a socket spanner and (using an air impact wrench) remove the wheel. Start unscrewing the track rod end pins with a socket spanner. Undo the pins located under the track rod end and at the stabiliser bar, then pull the track rod end away from the vehicle body. Fit the new track rod end, then screw it in with all the associated pins. Refit the wheel and its securing nuts.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Steering Tie Rod End on a Fiat Punto
Removing the Steering Tie Rod End on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Watch this video for the removal of the steering tie rod end on a Fiat Punto. Position your car on a column lift, raising it to a comfortable working…
How to Replace the Steering Track Rod Ends on the Fiat Grande Punto
How to Replace the Steering Track Rod Ends on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the steering track rod ends on the vehicle, follow these instructions: First, lift the car and remove the front wheel. Then, disconnect th…
Steering Rack Tie Rod End Replacement
Steering Rack Tie Rod End Replacement
Fiat Punto (1999-2011 / MK 2, 188) To replace the tie rod end attached to the end of the steering rack, lift the vehicle on a lift and remove the front wheel for better access (though …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos