Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Steering Track Rod Ends on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Steering wheel

To replace the steering track rod ends on the vehicle, follow these instructions: First, lift the car and remove the front wheel. Then, disconnect the track rod from the steering knuckle. Obtain a new steering track rod end and fit it in place of the old one, ensuring you clean and degrease the supports first. Next, tighten the lock nut on the track rod, and also clean and degrease the brake disc. Finally, refit the wheel and lower the vehicle. Repeat the same steps to replace the track rod end on the other wheel.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stabiliser Bar Linkages on the Fiat Grande Punto
How to Replace the Stabiliser Bar Linkages on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This video shows how to change the stabiliser bar linkages on the Fiat Grande Punto 199. You will need to lift the vehicle and remove the front wheel…
How to Remove the Steering Box from the Fiat Punto 176?
How to Remove the Steering Box from the Fiat Punto 176?
Fiat Punto (1993-1999 / MK 1, 176) To remove the steering box from the Fiat Punto 176, as well as from other Fiat, Lancia, and Alfa Romeo models, you must first remove the front wheels…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…

    Frequently Asked Questions

    • Punto 1999-2011 - Why does the power steering of the Fiat Punto fail? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos