Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Steering Box from the Fiat Punto 176?

Model: Fiat Punto MK 1, 176 - Years 1993-1999
Part: Checks and maintenance

To remove the steering box from the Fiat Punto 176, as well as from other Fiat, Lancia, and Alfa Romeo models, you must first remove the front wheels. Once done, go to the cabin to unscrew the universal joint: this is located where the pedals are and must be loosened with a 13mm spanner. Next, detach the two track rod ends that connect the wheels to the steering and unscrew the respective nuts. At this point, unscrew all the bolts indicated in the video tutorial located at the bottom of the car; once removed, you will be able to slide out the steering box.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (1993-1999 / MK 1, 176) In this new mini guide regarding the Fiat Punto 176, you will discover exactly where the internal fuse box of the car is located. Before proceeding, …
Fiat Punto (1993-1999 / MK 1, 176) Today, in this video tutorial, learn how to remove and replace the clutch of the Fiat Punto by following the instructions below. First, open the bonn…
Fiat Punto (1993-1999 / MK 1, 176) If the boot covering the tie rod (or axial joint) of the steering rack fails, it is essential to replace it promptly to prevent dirt and especially w…

    Frequently Asked Questions

    • Punto 2005-2018 - What problem does the Fiat Punto have with the "city mode"? Read answer
    • Punto 2005-2018 - How to bleed the Fiat Punto clutch pedal? Read answer
    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer
    • Punto 1999-2011 - How does the air conditioning of the Fiat Punto work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos