Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Winch on the Panda Cross

Model: Fiat Panda 319, MK 3 - Years 2012-2026

In this video, you will see how to install the winch on the Panda Cross. Open the engine bonnet to access the control unit. Remove the two stickers from the holes on the bumper to mount the winch. Connect the clamp that links the winch to the control unit. Position the winch against the bumper by inserting the two knobs into the bumper holes. Tighten the forks of the two knobs until they are flush and continue tightening until the winch fits snugly against the bumper. At this point, activate the control unit and use the remote to operate the winch.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Bars on the New Fiat Panda Cross
How to Install Roof Bars on the New Fiat Panda Cross
Fiat Panda (2012-2026 / 319, MK 3) Installing roof bars on the new Panda, especially with the Cross trim, will give it an even more appealing look and allow for the installation of a b…
How to Replace the Cabin Filter in a Fiat Panda Cross
How to Replace the Cabin Filter in a Fiat Panda Cross
Fiat Panda (2012-2026 / 319, MK 3) In this tutorial, you will see how to replace the cabin air filter in a Fiat Panda Cross, a very simple operation. It is located under the dashboard,…
How to Install a Reverse Camera on a Fiat Panda
How to Install a Reverse Camera on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To install the parking reverse camera on your vehicle, start by measuring the midpoint of the rear bumper with a tape measure. Next, begin mounting t…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos