Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to remove the door panel in the Fiat Grande Punto?

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Door panel
Operation: How to remove the door panel in the Fiat Grande Punto?

Removing the internal door panel, in the Fiat Grande Punto, is a very quick operation, we need a flat tip screwdriver, a star tip screwdriver and a 4mm Allen key. the flat screwdriver, then disconnect the connectors. Now let's remove the internal cover of the opening handle and, with the 4 wrench, unscrew the screw inside it as well as the other two placed under the support handle. Finally, the screws located on the bottom side will be removed. We can now pull the panel and disengage it from the blocks, being careful not to damage the cables.


Posted on 9 May 2024 by ScegliAuto



How to remove the Fiat Grande Punto door panel
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's see in this guide, the steps on how to remove and replace the front door panel of the Fiat Grande Punto, but also of the Punto Evo. First of al
Removing the rear door panel Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video tutorial we will see how to remove the rear door panel of a Fiat Grande Punto. First we open the door and then we go to remove the wind
Remove the rear door panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's find out in this video tutorial how to remove the rear door panel on the Fiat Grande Punto, but also on the Punto Evo. First of all, open the r

Other guides that may interest you

    Frequently Asked Questions

    • Punto 1999-2011 - How to remove the rear door panel in a Fiat Punto? Read Answer
    • Punto 2005-2018 - How to remove the rear door panel in the Fiat Grande Punto? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos