Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Key of the Fiat Alfa Lancia

Model: Fiat Fiat Various
Part: Key

In this video, you will learn how to dismantle the key of the Volkswagen. Take a flat-head screwdriver and a cross-head screwdriver. Open the key blade and use the flat-head screwdriver to remove the battery. With the cross-head screwdriver, unscrew the screw located under the key logo. Apply pressure outward at the centre of the two parts of the key to try to open it, being careful not to lose the spring inside. Once the casing is opened, remove the blade and set it aside. Also, set aside the transponder, which is very important for ignition. Dismantle the circuit board and set it aside as well. Now take the new casing and reassemble the various pieces as shown in the video.

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing and Cleaning the Throttle Body on the 1.9 CDTI - JTD Engine on Fiat and Opel
Removing and Cleaning the Throttle Body on the 1.9 CDTI - JTD Engine on Fiat and Opel
Fiat Fiat Various In this simple guide, you will find the steps to remove and clean the throttle body on the 1.9 CDTI and 1.9 JTD engines fitted in Opel and Fiat, as w…
How to replace the air filter on Fiat and Lancia vehicles
How to replace the air filter on Fiat and Lancia vehicles
Fiat Fiat Various Replacing the air filter on Fiat group cars follows the same procedure as replacing the air filter by the Lancia production company. To replace the f…
How to solve the problems of Blue & Me Centralibe
How to solve the problems of Blue & Me Centralibe
Fiat Fiat Various In this video we can see how it is possible to repair the Blue & Me control units of the Fiat-Lancia-Alfa Romeo group, without the need to replace th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos