Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs in the Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight

See other generations:
Video tutorial

In today's video, you will see how to replace the front bulbs in the Fiat Punto Evo. The units in question are H4 bulbs that serve both as dipped and main beam; decide whether you want to install an LED bulb or replace it with a new incandescent one. Start by opening the bonnet and allowing the vehicle to rest for half an hour.

Next, remove the dust cap and disconnect the power connector; then turn the holder and extract the burnt bulb.

At this point, insert the new unit and test it.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
How to Replace the Bulbs of the Rear Light on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replace the bulbs of the rear light on a Fiat Punto Evo. Let's see how to remove the light and replace the bulbs: open the boot lid, unscrew the secu…
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Replacing the Front Headlight Bulbs on the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this tutorial video, learn how to remove and replace the front headlight bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, open the…
How to Replace the Heating Control Bulbs on a Fiat Punto EVO
How to Replace the Heating Control Bulbs on a Fiat Punto EVO
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Let's see how to replace the heating control bulbs on a Fiat Grande Punto and Fiat Punto EVO. First, get inside the vehicle and remove the stereo usi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos