Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Brake Pedal Switch on Fiat 500

Model: Fiat 500 - Years 2007-2021
Part: Push button

This video tutorial shows how to replace the brake pedal switch. The brake switch sends a signal to the ECU to activate the brake lights when braking; it is activated by pressing the brake pedal. If the switch is not functioning, you will need to replace it; therefore, purchase a new switch from an authorised dealer. First, enter the vehicle and secure the car with the handbrake engaged. Remove the plastic cover to access the switch; once reached, simply disconnect the connector attached to it and unscrew the screw that holds it in place. Proceed to install the new switch. Reassemble all parts in reverse order.

Updated on 25 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2022 / 312) In this tutorial, you will see how to replace the stop switch on the Fiat 500, a very simple and quick operation. The failure of this device is often…
Fiat 500 (2007-2022 / 312) As seen in this tutorial, replacing the stop light switch on a Fiat 500 is an extremely simple and quick task. Often, the failure of this component i…
Fiat 500 (2007-2021 / 312) The fuse box is located inside the cabin at the bottom of the passenger side glove compartment. The diagram is as follows: Right dipped beam supply F…

How to Open the Fuel Cap of the Volkswagen Jetta

When you need to refuel this vehicle, first open the fuel filler flap. Follow these simple instructions, and you can also watch the video for more details. First, unlock the central locking to open the flaps. Then, press the fuel cap with your hand to unlock it and open it. Underneath, you will find the fuel cap, which you need to unscrew counterclockwise. At this point, you can proceed to refuel.

Watch the video!


by ScegliAuto

More videos