Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the air conditioning fuse located in the Fiat Toro?

Model: Fiat Toro MK 1 - Years 2016-2024
Part: Air conditioner

In case the air conditioning in the Fiat Toro suddenly stops working, the first thing we can do is check the relative fuses. As we can see in this video, the two fuses are both located in the box located inside the engine compartment, right next to the battery. The first, 7.5A and labeled with the initials F19, relates to the air conditioner compressor while the second, 40A and called F83, relates to the fan. In the event that one of them is faulty, replace it with a spare of the same amperage so as not to cause damage.

Posted on 14 June 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Fiat Toro located?
Where is the fuse box of the Fiat Toro located?
Fiat Toro (2016-2024 / MK 1) The Fiat Toro has two fuse boxes inside it. The first fuse box is located in the engine compartment, specifically near the battery. The second fuse b…
Placement of the Fiat Toro fuse boxes
Placement of the Fiat Toro fuse boxes
Fiat Toro (2016-2024 / MK 1) In case it is necessary to intervene on the electrical system or utilities of the Fiat Toro, it is important to know where the two boxes containing t…
How to replace the Fiat Toro cabin filter
How to replace the Fiat Toro cabin filter
Fiat Toro (2016-2024 / MK 1) If you want to replace the cabin air filter in your Fiat Toro yourself, just follow the instructions below. First turn off the vehicle completely and…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos