|
Do it yourself
| |||
| ||||
How to Remove the Airbag and Steering Wheel from the Fiat Doblò
Model: Fiat Doblo
223, MK 1, Doblo 1
- Years 2000-2009
In this guide, you will learn how to remove both the airbag and the steering wheel from the Fiat Doblò. First, locate the two holes at the back of the steering wheel, near the steering column, insert a flathead screwdriver and disengage the retaining clips (as shown at the beginning of the video) until the centre part of the steering wheel, where the airbag is installed, is released. Now disconnect the electrical connectors for both the airbag and the horn. Once done, extract the entire airbag unit. Next, remove the washer and then unscrew the bolt (that secures the steering wheel to the steering column) using a socket wrench. Now, being careful not to damage the wiring, slide the steering wheel off the column. It is advisable to always disconnect the battery when performing work involving the electrical system to prevent damage and for safety.
Updated on 29 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Doblo
(2009-2021 /
263, Doblo 2, MK 2)
In this guide, learn the procedure to remove and replace the steering wheel and its airbag on the Fiat Doblò in simple steps. First, get in the vehic…
Fiat Doblo
(2009-2021 /
263, Doblo 2, MK 2)
In this short guide, we will see the instructions on how to disassemble and eventually replace the steering wheel airbag of the Fiat Doblò. First, we…
Fiat Doblo
(2009-2021 /
263, Doblo 2, MK 2)
In this tutorial, we can see how to disassemble the steering wheel in the Fiat Doblò, an extremely simple and quick operation. First of all, we open …
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.104
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |