Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Fiat Tipo?

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air filter

See other generations:
Video tutorial

As shown in this tutorial, replacing the air filter on the Fiat Tipo is an extremely simple and quick operation. Before proceeding, ensure that the engine is completely cold for safety.

Start by opening the bonnet, then locate the airbox on the passenger side, just behind the headlamp. Next, disconnect the sensor connector, unscrew the three bolts on the front side, and lift the upper half of the box. At this point, extract the old filter and fit the replacement by following the reverse procedure.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Fiat Tipo 2 (356-357-358)
How to Replace the Cabin Filter on a Fiat Tipo 2 (356-357-358)
Fiat Tipo (2016-2026 / 358, 356, 357) Today, you will see the steps to remove and replace the cabin air filter on a second-generation Fiat Tipo (356-357-358). First, locate the air filter…
How to Replace the Cabin Filter on a Fiat Tipo
How to Replace the Cabin Filter on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Replacing the cabin filter on a Fiat Tipo independently is a very simple operation, aided by our brief tutorial. The cabin filter is located inside t…
Replacing the Air Filter on the Fiat Tipo
Replacing the Air Filter on the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Follow these simple and quick steps to remove and replace the engine air filter on the Fiat Tipo. First, open the bonnet and start by loosening the c…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos