Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Fiat Strada?

Model: Fiat Strada MK 1 - Years 1998-2021
Part: Clock

To set the clock on the Fiat Strada, turn on the instrument panel so you can navigate the menu on the onboard computer. To do this, use the directional controls on the central panel until you find the option displaying the clock. To modify it, press the MODE button and note that the hours will start to flash: after adjusting them with the directional buttons, confirm the entry by pressing MODE again. At this point, you can repeat the process for the minutes and confirm everything by turning off the instrument panel.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Fiat Strada?
How to Set the Time on a Fiat Strada?
Fiat Strada (1998-2021 / MK 1) In this tutorial, you will see how to set the time on a Fiat Strada, a very simple and quick operation, for example, after replacing the battery or f…
How do you reset the Service light of the Fiat Strada?
How do you reset the Service light of the Fiat Strada?
Fiat Strada (1998-2021 / MK 1) To reset the Service light that appears on the instrument panel of the Fiat Strada, you will need to connect a diagnostic tool to the vehicle's OBD p…
What is the Unlock Code for the Fiat Strada Radio?
What is the Unlock Code for the Fiat Strada Radio?
Fiat Strada (1998-2021 / MK 1) The unlock code for the Fiat Strada radio can be obtained by completely removing the device from its housing. This allows you to read the serial numb…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos