Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the low beam / high beam bulb on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years 2005-2018
Part: Headlight bulb

To replace the low beam / high beam bulb of the Fiat Grande Punto, we open the bonnet, go to the back of the headlight, remove the plastic cover, using a small screwdriver, release the clip that holds the bulb in place, with the same screwdriver we pry to extract the bulb by removing it from the connector and remove it from the headlight. We take the new bulb (code H4), put it in place of the old one (being careful not to touch the glass of the bulb), hang up the connector, hang up the clip that holds the bulb in place and finally put the plastic cover back on. Now we can turn on the lights and see if the new bulb works.

Posted on 18 September 2022 by ScegliAuto

Video tutorial

Related tutorials

How to mount the h4 leds on the Fiat Grande Punto
How to mount the h4 leds on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To install an h4 (low beam and high beam) led bulb on a Fiat Grande Punto, we start by removing the rear rubber cap of the headlight, disconnect the …
How to replace the front bulbs of the Fiat Grande Punto
How to replace the front bulbs of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video we will see how to replace the front bulbs of the Fiat Grande Punto. We operate after the car has been standing still for some time, so…
How to replace the front bulbs on the Fiat Punto Evo
How to replace the front bulbs on the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In today's video you will see how to replace the front bulbs in the Fiat Punto Evo. The units in question are H4s which act as both low beam and high…

How to Remove the Steering Wheel Airbag on a Dodge Journey

How to remove the steering wheel airbag on a Dodge Journey? Follow these steps. Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps from the back of the steering wheel, then unscrew the airbag retaining bolts with a socket wrench. Once the driver’s airbag is released, disconnect the power connectors and remove the airbag from the steering wheel. For reinstallation: connect the power connectors, then press the airbag back onto the steering wheel while simultaneously tightening the rear bolts.

Watch the video!


by ScegliAuto

More videos