Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio of the Fiat 500?

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

To replace the radio of the Fiat 500, use a screwdriver to lift the buttons at the corners of the radio, exposing the four holes underneath. Insert the U-shaped keys into these holes to release the locking pins inside the device.

Once extracted from its housing, disconnect the connectors at the back and connect the new device. Finally, fit it back into its housing and reassemble the buttons.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Fiat 500
Removing the Radio from a Fiat 500
Fiat 500 (2007-2024 / 312) Removing the radio from a Fiat 500? Follow these steps for removal and installation on the 500. Use original or aftermarket metal keys to detach the …
Removing the Original Radio from Your Fiat 500
Removing the Original Radio from Your Fiat 500
Fiat 500 (2007-2024 / 312) Want to remove the original radio from your Fiat 500? Follow this guide to remove the original stereo: remove the plastic cover buttons (as shown in …
How to Remove the Original Radio from a Fiat 500
How to Remove the Original Radio from a Fiat 500
Fiat 500 (2007-2024 / 312) How to remove the original radio from a Fiat 500? Watch this video carefully to see how to carry out the removal following the tutorial. Use the orig…

    Frequently Asked Questions

    • 500 2007-2021 - How to activate the aux cable in a Fiat 500? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2014-2022 - What to do if the USB port of the Fiat 500X does not work? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos