Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from a Fiat 500

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Car stereo

See other generations:
Video tutorial

Removing the radio from a Fiat 500? Follow these steps for removal and installation on the 500. Use original or aftermarket metal keys to detach the stereo from the 500. Remove the buttons above the head unit, insert the keys into the holes on the plastic trim of the stereo (at the sides of the stereo), lock them in place, and pull the stereo towards you as shown in the video.

Carefully extract the head unit, paying attention to the various wiring (disconnect the power connectors and the antenna cable).

Install the new head unit in place of the old one. Fit a generic radio adapter.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Remove Radio from Fiat 500
Remove Radio from Fiat 500
Fiat 500 (2007-2021 / 312) Let's see how to remove the car radio from a Fiat 500. Use the original or aftermarket metal keys to remove the radio from the 500. Insert the keys i…
Removing the Radio from the Dashboard of a 500
Fiat 500 (2007-2021 / 312) Learn how to remove the radio from a Fiat 500. To take out the radio, you need to detach the control buttons. Use the original metal keys to remove t…
Removing the Stereo from the Fiat 500
Removing the Stereo from the Fiat 500
Fiat 500 (2007-2021 / 312) To remove the car stereo, proceed as follows: access the cabin from the driver's side, where the stereo is located on the upper central console. Usin…

    Frequently Asked Questions

    • 500 2007-2021 - How to activate the aux cable in a Fiat 500? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2014-2022 - What to do if the USB port of the Fiat 500X does not work? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos