Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the antenna of the Fiat 500

Model: Fiat 500 500 L - Years 2012-2023
Part: Antenna

The YouTuber who made this video wanted to replace the original antenna of his Fiat 500 with a shark fin-shaped one, which is more aerodynamic and more aesthetically pleasing. If we also want to do the same thing on our car, we just have to follow the steps. First, we unscrew the old antenna, clean the surface where we will install the new shark fin-shaped one, which must be prepared for installation with the appropriate double-sided adhesive tape. At this point, all we have to do is connect the cable, securing it with the bolt, and position the new antenna after removing the protective film from the double-sided tape.

Posted on 1 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the radio antenna of the Fiat 500
How to disassemble the radio antenna of the Fiat 500
Fiat 500 (2007-2024 / 312) If you are experiencing serious reception problems with the car radio of your new Fiat 500 and want to learn how to replace the antenna, then all you…
Removing the Antenna from a Fiat 500
Removing the Antenna from a Fiat 500
Fiat 500 (2007-2021 / 312) Do you want to replace the antenna on your Fiat 500? Unscrew the antenna from the base and then open the tailgate. Detach the clips from under the co…
How to replace the antenna of a Fiat 500
How to replace the antenna of a Fiat 500
Fiat 500 (2007-2024 / 312) Let's see how to replace the antenna of a Fiat 500, as it is a component that has often caused problems for owners of this car. The youtuber recommen…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos