Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to replace the Fiat 500 antenna

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Antenna
Operation: How to replace the Fiat 500 antenna

If we want to try our hand at a do-it-yourself replacement of the antenna on our car, we can follow the instructions below, also referring to the video tutorial. This car model mounts a classic antenna with the rod screwed to the base and is placed in the rear part of the roof. To be able to disassemble the antenna rod it is sufficient to unscrew it, while if we also want to disassemble the base fixed to the roof we must disassemble the ceiling from the passenger compartment, locate the fixing screw and unscrew it in this way we could extract the base of the antenna from the outside. antenna and replace it if necessary.


Posted on 8 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos