Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Stereo from the Fiat 500

Model: Fiat 500 312 - Years 2007-2021
Part: Car stereo

To remove the car stereo, proceed as follows: access the cabin from the driver's side, where the stereo is located on the upper central console. Using a pointed object, remove the four small covers located beside the buttons. Under these covers, there are holes to attach the two extraction keys. Take the two extraction keys and insert them into the holes to extract the stereo unit. Be careful when removing the stereo, as there are rear connection cables; disconnect the electrical connectors and the antenna cable.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio from a Fiat 500
Removing the Radio from a Fiat 500
Fiat 500 (2007-2024 / 312) Removing the radio from a Fiat 500? Follow these steps for removal and installation on the 500. Use original or aftermarket metal keys to detach the …
How to Remove the Original Radio from a Fiat 500
How to Remove the Original Radio from a Fiat 500
Fiat 500 (2007-2024 / 312) How to remove the original radio from a Fiat 500? Watch this video carefully to see how to carry out the removal following the tutorial. Use the orig…
Removing the Radio from a Fiat 500X
Removing the Radio from a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Do you want to remove the radio from a Fiat 500X to connect other cables? Follow these steps: Remove the radio trim from the dashboard, then use a sc…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Why does the radio volume control on the Fiat 500 not work? Read answer
    • 500 2007-2022 - What to do if the radio of the Fiat 500 does not work? Read answer
    • 500 2012-2023 - How to unlock Fiat 500 car stereo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos